Archive

RIYA PCI 2.00 card
	• PCI Bus • Separate control of 2 laser projectors • Three 12 bit Dacs for each projector (x,y,z outputs) • 8 bit dacs for R, G, B for each projector • 8 bit DAC for Intensity/Blanking control (for each projector) • Master beam shutter control (for each projector) • 8 bit TTL In, 8 bit TTL Out registers (for each projector) • Music modulation of image gain.   • Music modulation of image position. • Up to 8K Points per frame, up to 200,000 points per second output. • Up to 2 cards may be installed on one PC.
RIYA F4 card
	• X/Y - 12 bit DACs • 8 bit R DAC • 8 bit G DAC • 8 bit B DAC • AVR processor AT90S8515 by Atmel • 2K x  FIFO • Gain modulation by music •Position modulation by music • Up to 50`000 points per second (output production) • Each card controls one scanner. • Up to 2 cards may be installed on one PC.
RIYA AVR card
	• X&Y - 12 bit DAC • 8 bit DAC for R • 8 bit DAC for G • 8 bit DAC for B • AVR processor AT90S8515 by Atmel • 2K x 8 dual port RAM •Amlitude modulation by music • Position modulation by music • Up to 50,000 points per second output •Each card controls one scanner. • Up to 2 cards may be installed on one PC.
RIYA SCAN-12Music card
	• 12 bit X/Y output • RGB-I 8 bit defined as: 2bit R, 2 bit G, 2 bit B, 2 bit I or blanking • 8 TTL inputs • 8 TTL outputs • Music input can be microphone or line input • Image motion controlled by music input (8 bit) • X/Y Scale controlled by music input • Music gate is an 8 bit digital value and controls the position or scale • System control register uses 8 bit music mode flags • Each card controls one scanner.
RIYA SCAN-12 card
	• X -12 bit Signal  •Y -12 bit Signal • IN  -8 TTL inputs • OUT - 8 TTL outputs • R-G-B-I 8 bit: 2bit RGB, 2 bit INTENSITY • A precision digital timer- Intels 8253, controls output pps • Each system controls one X/Y scanner system.
RIYA SCAN-dual 8bit card
	• Music level microphone input controls X/Y image gain • Music modulation depth control • Control 2 scanners with each card.   Additional options (enabled by control register) • Music modulated X/Y gain • Music modulated X/Y phase ( in or out of phase) • Music modulated X/Y position •2 separate blanking signals, one for each output. • X1, X2 - signal X for scan unit 1 and 2 • Y1,Y2 - signal Y for scan unit 1 and 2 • X off.1, X off.2 - offset X for scan unit 1and 2 • Y off.1, Y off.2 - offset Y for scan unit 1 and 2
RIYA Scan LPT
	Additional options (enabled by control register) •  Music modulated X/Y gain• •  Music modulated X/Y position• •Output disable signal ( 0V ) • 3 position blanking- Up-Off-Down • 8 bit ADC Music input • The RIYA-120 includes X/Y scanner amps •RS 232 - RS 485 input converter (for Optical Beam Table Controller) • Connects to standard LPT port • Controls 1 scan unit.
• X signal X • Y signal Y • X offset for X scanner • Y offset for Y scanner • X-Y amplifier gain control • Music level microphone input • Music depth control
RIYA PORT_IO card
	• Output TTL - 104 bit • Input TTL - 8 bit • two RS 232 - RS 485 converters • One RS 485 - RS 232 converter • Control an optical table and motor

Controllers

Laser scanner controller R010

Light dynamic System Laser scanner controller R010 includes laser and sound signal driven galvo system (operational frequency up to 120 Hz). 2D or 3D effects could be generated using 60 sequences in manual mode or 14 sequences in auto mode.
System can also monitor the optical switch using sound signal or internal trigger.
Sequences could be synchronized with sound signal or internal trigger.

Laser controller D43m

Light dynamic System Laser Controller RIYA-D43M contains 4 channels of step motor driven optical switch and set of external diffraction, Interference and mirror elements that could be rotated with adjustable speed and direction. Remote panel allows switching channels of the optical switch manually or automatically from the sound signal or internal trigger in one of 10 allowable sequences.
System also includes three hi speed motors for beam scanning and channel for monitoring scanning pattern.

FIREbeam

FIREbeam LD

Light dynamic system Fire Beam contains laser and three hi-speed electric motors for beam scanning. Scanning parameters can be monitored manually or with using of sound signal - either electrical signal and/or via the microphone and also through internal trigger capable to switch between 256 images.
Fire beam system includes remote and laser adapter. Light source - He-Ne laser 10 to 50 mW .
Fire beam LD is single piece unit with internal semiconductor laser with output power 3 up to 12 mW.
 

LASCAN

Light dynamic System LASCAN contains laser and sound signal driven galvo system (operational frequency up to 120 Hz). System allows create different types of images - horizontal or vertical planes, cones, stars.
Size of the images and spatial position could be controlled using same sound signal.

General Information: info@riyalasers.com